Novie Box Stock Class

Driver Restriction: 2005-2021 PNWC Final any classes A Main drivers, NOT allowed in this class. If you sign up for Novice Box Stock, you are only allowed additional class for 2WD Stock.

Motor: Kyosho MZ9P and MZ9E Motor from RTR, allowed to change the motor wire and remove the safety switch.

Chassis: Kyohso MR03S, MR03S2 and MR03 RWD.

Wheels: Kyosho or PN plastic wheels, Front 8.5mm x 20mm, Rear 11mmx20mm, offset must fit inside of the body.

Tire: Kyosho or PN rubber tire only.  Traction Compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the driver's meeting.

Electronic & Transmitter: Kyohso original from RTR, NO any modification.

Gear Ratio: Fixed 9T Pinion with Stock Gear Diff. Kyosho or PN 400329 only.

Wheelbase: 90mm to 102mm

Body: Kyosho original AutoScale body, white body, Jomurema GT01 body and TRP Scale body, all parts must be original form that body, limited wheel clearance modification allowed.

Batteries:Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, TRP900, PN HP750 and PN HP900
AAA NiMH 4pcs only.

Option Parts: Kyosho or PN Ball Bearing, wheel nut and T-Plate only.

Modifications: It must be run in stock configuration. 

2WD Stock Class

Driver Restriction: 2005-2021 PNWC Final any classes A Main top 3 position drivers, NOT allowed in this class.

Chassis: Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, MRC MR01 and PNR2.5W. 90mm-98mm wheel base only.

Body: Kyosho Mini-Z, TRP Scale and Jomurema GT01, GL 488 Lambo body only, LeMans body NOT allowed, full windshield and window must be installed, except for clearance, Lexan window and Lexan Roof allowed.

Motor: Event Purchased Handout motor ONLY - will be PN Brushless V3.1 3500kv #160035WC, all motor comes with standard 14.5 rotor. Handout motor will be sealed with security label, if the label removed or broken will be VOID. Motor will be provided at first practice day for purchase (Entry Fee not included), each class maximum purchase two motor.

Fixed Gear ratio 64 Pitch 16 Pinion (#416416 or #426416) / 53T Spur Gear (#MR2953WC Yellow or #MR2055-T53WC Yellow) ONLY P a g e | 4

ESC: Kyosho ASF VE VE Pro MR03S RWD and EVO, PN 16A ESC (#500807 and #500807A)

Battery: Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used. No other type of battery may be used. For example: Lithium Polymer may not be used. Additional battery for transponder allowed.

Option Parts: Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel: All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting. 

GTLM Super Stock Class

Chassis: Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR, GLR-GT, MRC MR01, PNR2.5W, PNR3.0, RTRC RTA, Atomic MRZ, NEXX Skyline and Reflex RX28. GT Body 90mm-98mm wheel base only LM Body 102mm wheel base only.

Body: Kyosho Mini-Z, TRP Scale and Jomurema GT01, GL 488 Lambo body only, full windshield and window must be installed, except for clearance, Lexan window and Lexan Roof allowed.

Motor: Handout motor PN Brushless Anima 3500kv #170035WC, all motor comes with standard 14.5 rotor, and all motor will inspect by motor checker machine, make sure all motor running on same performance, and all motor will be sealed with security label, if the label removed or broken will be VOID.  Motor will be provided at first practice day for purchase (Entry Fee not included), each class maximum purchase two motor. Fixed Gear ratio 64 Pitch 10 Pinion (#416410WC or #426410WC) / 53T Spur Gear (#MR2953WC Yellow or #MR2055-T53WC Yellow) ONLY

ESC: OPEN any Sensored or Sensorless ESC on BLINKY MODE only (when applicable), no Bluetooth device attached. Battery: 2S Li-Po battery maximum 8.4 volt

Option Parts: Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel: All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting.

2WD Modified Class

Chassis: Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR GLR-GT, MRC MR01, PNR2.5W, PNR3.0, RTRC RTA, Atomic MRZ MRT, NEXX Skyline and Reflex RX28 94mm-98mm Wheel Base ONLY, No weight limit. (Aftermarket chassis TBA, contact philip@pnracing.com to submit your chassis homologation)

Approved Lexan Body: PN - Supra A90, JGT1, JSK, AD4, GT4LB, 992GT3, M4GT3, Concept C9, V2 JGT01 SBRC - Zenvo ST1, Phenom GT, NSX, 458, SBX, STR, HYR Marka - RK410, RK408, RK-S, RK-SP6, RK-P-One, RK-W, RK-12, RK-TWR, RK-BLD, RK-NT Atomic - M4Z, DBX, HYP, VST, GL Racing - P1M Maximum wing size not bigger than original wing cutting line. #600630 PN Carbon Wing and #600640 Lexan Wing allowed. (Aftermarket bodies is TBA, contact philip@pnracing.com to submit your bodies sponsor)

Motor: Open any Mini-Z size motor, Sensored or Sensorless.

ESC: Open any ESC Sensored or Sensorless. Battery: Any battery maximum 8.4 volt Additional battery for transponder allowed.

Option Parts: Any aftermarket brand Mini-Z production parts allowed. Any homemade parts, 3D print option parts and prototype parts NOT allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel: All brand Plastic and Aluminum rims are allowed. Maximum front wheel width is 11mm. Maximum rear wheel width is 14mm. Maximum wheel diameter is 21mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel NOT allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting. 

AWD Modified Class

Chassis: Kyosho Mini-Z Racer AWD MA010, MA015, MA020 and MA030, Atomic BZ and SZ2, GL Racing GLA, GL GLA Giulia Chassis with 98mm/WB, Mini-Q Q7. 94mm-98mm Wheel Base ONLY, No weight limit. (Aftermarket chassis TBA, contact philip@pnracing.com to submit your chassis homologation).

Approved Lexan Body: PN - Supra A90, JGT1, JSK, AD4, GT4LB, 992GT3, M4GT3, Concept C9, V2 JGT01 SBRC - Zenvo ST1, Phenom GT, NSX, 458, SBX, STR, HYR Marka - RK410, RK408, RK-S, RK-SP6, RK-P-One, RK-W, RK-12, RK-TWR, RK-BLD, RK-NT Atomic - M4Z, DBX, HYP, VST GL Racing - P1M Maximum wing size not bigger than original wing cutting line. #600630 PN Carbon Wing allowed. (Aftermarket bodies is TBA, contact philip@pnracing.com to submit your bodies sponsor)

Motor: Open any Mini-Z 1525/130 size motor, Sensored or Sensorless. ESC: Open any ESC Sensored or Sensorless Battery: Any battery maximum 8.4 volt Additional battery for transponder allowed.

Option Parts: Open any parts allowed (including homemade parts, 3D print parts and prototype parts) Wheel: All brand Plastic and Aluminum rims are allowed. Maximum Front wheel width is 11mm. Maximum Rear wheel width is 14mm. Maximum wheel diameter is 20.5mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting. 

Pan Car Open Class

Chassis: Open any RWD chassis ONLY, 94mm-98mm Wheel Base ONLY.

Body: MUST be use the following bodies list, allow to cut the rear panel. #600800 PN Racing Lexan Pan Car Body #600810 PN Racing BMR Lexan Pan Car Body #600810L PN Racing BMR Lexan Light Weight Version Pan Car Body #600819 PN Racing AMR Lexan Pan Car Body #600819L PN Racing AMR Lexan Light Weight Version Pan Car Body Marka RK-AMR Atomic MP1 #SBRC-B011 SBRC Pan Body (Rear Wing must be not higher than the side wing) (Aftermarket Pan Car Body TBA, contact philip@pnracing.com to submit your chassis sponsor)

Motor: Open any Mini-Z 1525/130 size motor, Sensored or Sensorless.

ESC: Open any ESC Sensored or Sensorless

Battery: Any battery maximum 8.4 volt Additional battery for transponder allowed.

Option Parts: Open any parts allowed (including homemade parts, 3D print parts and prototype parts)

Wheel: All brand Plastic and Aluminum rims are allowed. Maximum Front wheel width is 11mm. Maximum Rear wheel width is 14mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire: Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting.