Outlaw TRUCK:

Body:

Any Truck Body

Chassis:

Rear or Mid Motor

After market chassis's ok

After market towers ok

Short or long shocks ok

Electronics:

Speed controls must be in blinky/non timing mode

Motor:

Open ROAR 13.5

Battery:

ROAR approved 2c battery

Batteries must remain in stock centered location

Adjustments:

Internal limiters, pistons, springs and oil changes allowed

Rear Toe no less than 2* and must be the same on both sides

Weight may be added

Tires:

TIRES must use truck wheels Foam or rubber tires ok

Minimum Weight 56oz

17.5 Sprint:

DODC national rules

6x6 Wing

Front Wing optional

17.5 Trinity Equalizer Spec Motor.  Part #TEP1841

ROAR approved 2c battery

Speed controls must be in blinky/non timing mode

Open tire

Minimum Weight 55oz

‍

Mudboss:

Body:

 Salvas Mudboss body only.

Chassis:

 Traxxas Slash 2wd ONLY. LCG Traxxas chassis allowed.

 Custom Works adjustable rear control arms allowed. Part #3270.

 RPM off-set compensating front control arms allowed. Part #70552.

 Any RPM 2wd Traxxas Slash stock replacement parts are allowed.

 NO aluminum, carbon fiber or graphite parts allowed.

 Front stock bumper, right side nerf bar/bumper and front body post brace must be removed.

 Left side nerf bar/bumper and rear bumper can be removed if desired.

 Traxxas front optional bumper can be used angled down. Part #2735.

 Alterations to the chassis or modifications to the drivetrain/suspension components are not allowed.

Electronics:

 ESC – Hobbywing Justock Part #30112000 or Traxxas XL-5 Part #3018R are allowed.

Motor:

Hobbywing 13.5 locked timing Part #30408010 or Traxxas 12T Titan Part #3785  are allowed.

Battery:

Any ROAR approved 2S lipo battery is allowed (Any MAH or C rating allowed).

 Servo – Any servo may be used.

Adjustments:

 Any Traxxas 2wd Slash stock spur gear 76/83/86/90 may be used with all transmission parts in place including the slipper.

 Any pinion size allowed.

 No modifications can be made to the stock transmission case. RPM transmission case is allowed.

 No modifications allowed to the stock transmission gearing. NO internal plastic gears allowed. Traxxas 2wd Slash steel transmission gears ONLY.

 Transmission functionality rule – motor cannot spin while turning slowly one rear wheel a full turn.

Suspension:

 Traxxas 2wd Slash plastic shocks ONLY (grey or black version)

•  (front shocks, bodies & shafts stay in front), (rear shocks, bodies and shafts stay in rear).

 Only original Traxxas 2wd Slash front springs #5857/P and rear spring #5858/P are allowed.

 Shock travel may be limited with internal shock spacers/shims.

 Original pistons from Traxxas 2wd Slash kit ONLY (original 1, 2 or 3 hole). NO modifications can be made to shock pistons.

Tires & Wheels:

 Any TREADED tires can be used. Must have tread, must be able to hang a nail on the tread. (NO slicks or pin tires allowed).

 ** During "Summer Series Concrete Oval" must use Jaco foam tires and wheels.  Purple compound Part #JAC2055LP.

No Weight Rule

See rules here:

https://www.tracktimehobbies.com/racing-rules/oval-class-rules-for-r-c

See rules here:

https://www.tracktimehobbies.com/racing-rules/oval-class-rules-for-r-c

See rules here:

https://www.tracktimehobbies.com/racing-rules/oval-class-rules-for-r-c

Tamiya TCS rules must be followed
‍

ARTICLE 16: EURO-TRUCK

This is a pure box stock class open to any skill level hobbyist.

Recommended Minimum Skill level: Novice, Intermediate to Advanced

16.1 Legal kits: Item 58632 Team Hahn Racing MAN TGS, 58642 Team Reinert Racing MAN TGS, 58661 Buggyra Racing Fat Fox, and 58683 Tankpool24 Mercedes Actros

16.2 The kit must be built EXACTLY per the instruction manual.

16.3 The ONLY Hop-Op Options permitted are Ball Bearings (ANY BRAND), and any Tamiya servo saver.

16.4 Must use the stock pinion and spur gear.

16.5 Must use the kit supplied Tamiya TBLE-02S/TBLE-04S ESC/THW-1060 Brushed Motor ESC (2-3S) Hobbywing OEM-Same as QUICRUN 1060 BRUSHED ESC (2-3S).

16.6 Must use the kit supplied motor (item 54358 RS-540 Torque-Tuned Motor)

16.7 Battery connector on ESC may be changed to DEANS type or XT-60.

16.8 The Motor Bullet Connectors may not be removed.

16.9 The ESC & Motor wires may not be shortened, or removed!

16.10 All polycarbonate body parts must be used.

16.11 All screws in the kit must be used. You may not omit screws to change the handling of the truck.

16.12 Minimum weight: NONE. No weights, of ANY KIND, may be put on the truck for ballast.

16.13 Adding FOAM material to the kit foam bumper is permitted. You may also use item 54819 Urethane Bumper XL in place of the stock size bumper.

16.14 Tires: Must use kit type tires, and wheels.

16.15 Any grease, or lube may be used to lubricate gears, or moving parts.

16.16 Any Tamiya Hi-Torque Servo Saver is Permitted.

16.17 It’s permitted to mix & match front/rear wheels on the truck for durability.

16.18 Batteries: Any stick-pack type, hard round case LiPO, NiCD, or Ni-MH is permitted. Examples: Reedy Wolf-Pack, or Peak Racing Powermax batteries.

‍