Kyosho Box Stock
INFO / RULES
Anyone that has registered for Super Stock or above, will not be allowed to compete in this class
Chassis | Kyosho MR03S, MR03S2, and MR03 RWD | Wheelbase | 90mm to 102mm | Motor | Kyosho MZ9P and MZ9E Motor from RTR | Gear Ratio | Fixed 9T Pinion with Stock Gear Diff. Kyosho or PN 400329 only. | Wheels | All brand plastic Mini-Z production rims are allowed. The maximum front-wheel width is 8.5mm. The maximum rear wheel width is 11mm. The maximum wheel diameter is 20mm. All rims must be original designs made for Mini-Z cars. Modifications, slot-car, and 3D print wheels are not allowed | Tire | Refer to General Rules>Tires section for information. | Batteries | Cars must be powered by 4 AAA batteries. Alkaline, Ni-MH, or Ni-Cd batteries may be used. No other type of battery may be used. An additional battery is allowed and may only be connected to a transponder. | Electronic & Transmitter | Only Kyosho original items included in the box are allowed, with NO modifications. | Body | Kyosho autoscale original body, Kyosho autoscale white body. All parts must be the original for that body. | Option Parts | Ball bearings, wheel nut, and T-Plate only. | Modifications | Kingpin flip allowed. |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
Stock
INFO / RULES
Chassis | Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR, GLR-GT, MRC MR01, PNR2.5W, RTRC RTA, Atomic MRZ & MRZ Pro, Reflex RX28, NEXX Skyline & Specter, PN PNR3.0, PN PNR2.5 | Wheelbase | GT Body 90mm - 98mm, LM Body 102mm only | Motor | Open 3500kv, No option or aftermarket rotors are allowed. The motor will be teched for Kv using a Motor analyzer. Maximum Kv 3700.
Open 2500kv, No option or aftermarket rotors are allowed. The motor will be teched for Kv using a Motor analyzer. Maximum Kv 2800.
Motors will be marked prior to the event start and will be verified prior to each run | Gear Ratio | (AAA/3500kv) 64 Pitch 16t Pinion/53t Spur Gear
(Lipo/2500kv) 64 Pitch 13t Pinion/53t Spur Gear
Pinion and Spur will be marked prior to the event start and will be verified prior to each run | Wheels | All brand plastic and aluminum Mini-Z production wheel rims are allowed. The maximum front-wheel width is 8.5mm. The maximum rear wheel width is 11mm. The maximum wheel diameter is 20mm. All rims must be original designs made for the Mini-Z car. Modifications, slot-car, and 3D print wheels are not allowed. | Tire | Refer to General Rules>Tires section for information. | Batteries | 4 AAA Alkaline, Ni-MH, or Ni-Cd batteries. No other type of battery may be used.
Lipo battery, 2 cells or 2 one-cells paralleled maximum 8.4 volts. | ESC | Any manufacturer ESC is allowed. Sensored ESC must have and be in BLINKY MODE. No attached Bluetooth modules are allowed. | Body | Kyosho Mini-Z, TRP Scale, and Jomurema GT01 body only. LeMans bodies are allowed. Refer to General>Body & Modifications section for additional information. | Option Parts | Any aftermarket brand Mini-Z production parts are allowed. Homemade, 3D printed, and prototype parts are NOT allowed. The only allowed 3D Printed parts are; Transponder Holder, Body Side Clips, ESC Top Cover, and front body clip. |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
Super Stock
INFO / RULES
Chassis | Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR, GLR-GT, MRC MR01, PNR2.5W, RTRC RTA, Atomic MRZ & MRZ Pro, Reflex RX28, NEXX Skyline & Specter, PN PNR3.0 | Wheelbase | GT Body 90mm - 98mm, LM Body 102mm only | Motor | Open 3500kv, 8,4v Lipo only, No option or aftermarket rotors are allowed. The motor will be teched for Kv using a motor analyzer. Maximum Kv 3700.
Open 5500kv, 4 AAA Alkaline, Ni-MH, or Ni-Cd batteries only, No option or aftermarket rotors are allowed. The motor will be teched for Kv using a motor analyzer. Maximum Kv 5700.
Motors will be marked prior to the event start and will be verified prior to each run | Gear Ratio | 64 Pitch 10t Pinion/53t Spur Gear ONLY.
Pinion and Spur will be marked prior to the event start and will be verified prior to each run | Wheels | All brand plastic and aluminum Mini-Z production wheel rims are allowed. The maximum front-wheel width is 8.5mm. The maximum rear wheel width is 11mm. The maximum wheel diameter is 20mm. All rims must be original designs made for Mini-Z racer. Modifications, slot-car, and 3D print wheels are not allowed. | Tire | Refer to General Rules>Tires section for information. | Batteries | 3500kv motors are allowed to use Lipo battery, 2 cells or 2 one cells paralleled maximum 8.4 volts.
5500kv motors are ONLY allowed 4 AAA Alkaline, Ni-MH, or Ni-Cd batteries. | ESC | Any manufacturer ESC is allowed. Sensored ESC must have and be in BLINKY MODE. No attached Bluetooth modules are allowed. | Body | Any manufactured molded hard shell that fits the allowed wheelbase. Refer to General>Body & Modifications section for additional information. | Option Parts | Any aftermarket Mini-Z production parts are allowed. Homemade, 3D printed, or prototype parts are NOT allowed. Only 3D-printed transponder holders, bodyside clips, or ESC top covers are allowed. |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
Sedan Open
INFO / RULES
Chassis | Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR GLR-GT, MRC MR01, PNR2.5W, RTRC RTA, Atomic MRZ, MRZ Pro, Atomic MRT, Reflex RX28, and NEXX Skyline, PN PNR3.0 | Wheelbase | 90mm - 102mm wheelbase | Motor | Any Mini-Z size motor, sensored or sensorless. | Gear Ratio | Open. | Wheels | All brand plastic and aluminum Mini-Z production wheel rims are allowed. The maximum front-wheel width is 11mm. The maximum rear wheel width is 14mm. The maximum wheel diameter is 20mm. All rims must be original designs made for Mini-Z racer. Modifications, slot-car, and 3D print wheels are not allowed. | Tire | Refer to General Rules>Tires section for information. | Batteries | Any battery maximum 8.4 volts. | ESC | Open any ESC sensored or Sensorless. | Body | Maximum wing size not bigger than original wing cutting line. #600630 PN Carbon Wing and #600640 Lexan Wing allowed. Refer to General>Body & Modifications section for additional information. | Option Parts | Any aftermarket brand Mini-Z production parts are allowed. Any homemade parts, 3D print option parts, and prototype parts are NOT allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed. |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
AWD Open
INFO / RULES
Chassis | Kyosho Mini-Z Racer AWD MA010, MA015, MA020, and MA030, Atomic BZ and SZ2, GL Racing GLA, Mini-Q Q7 | Wheelbase | 94mm-98mm ONLY, No weight limit, | Motor | Any Mini-Z size motor, sensored or sensorless. | Gear Ratio | Open | Wheels | All brand Plastic and Aluminum rims are allowed. The maximum front-wheel width is 11mm. The maximum rear wheel width is 14mm. The maximum wheel diameter is 21mm. All rims must be original design made for Mini-Z RACER, any modification is not allowed, and any slot-car design wheel and 3D print wheel are NOT allowed. | Tire | Refer to General Rules>Tires section for information. | Batteries | Any battery maximum 8.4 volts. | ESC | Open any ESC sensored or Sensorless. | Body | Any Lexan body that will fit a 94 - 98mm wheelbase. Pan car and wedge bodies are NOT allowed. Wing must be cut on or below the manufacturers’ provide lines. Refer to General>Body & Modifications section for additional information. | Option Parts | Open any parts allowed (including homemade parts, 3D-printed, and prototype parts.) |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
Pan Car Open
INFO / RULES
Chassis | Open any 2WD chassis ONLY. Prototype or pre-production chassis allowed. | Wheelbase | 94mm-102mm | Motor | Any Mini-Z size motor, sensored or sensorless. | Gear Ratio | Open. | Wheels | All brand plastic and aluminum Mini-Z production wheel rims are allowed. The maximum front-wheel width is 11mm. The maximum rear wheel width is 14mm. The maximum wheel diameter is 20mm. All rims must be original designs made for Mini-Z racer. Modifications, slot-car, and 3D print wheels are not allowed. | Tire | Refer to General Rules>Tires section for information. | Batteries | Any battery maximum 8.4 volts. | ESC | Open any ESC sensored or Sensorless. | Body | Allowed to cut the rear panel.
Refer to General>Body & Modifications section for additional information. | Option Parts | Open any parts allowed (including homemade parts, 3D-printed, and prototype parts.) |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
F-1
INFO / RULES
All cars must perform 2 pit stops during each main
Chassis | GLF-1 | Wheelbase | 114 mm Wheel Base ONLY | Motor | Open 3500kv, 8,4v Lipo only. No option or aftermarket rotors are allowed. Motors will be teched for Kv using a SkyRC Motor analyzer. Maximum Kv 3700. | Gear Ratio | 64 Pitch 12t Pinion/53t Spur Gear ONLY. | Wheels | Any brand F1-specific front and rear rims are allowed. The maximum front-wheel width is 11mm. The maximum rear wheel width is 14mm. The maximum wheel diameter is 20mm. All rims must be original designs made for 28th-scale cars. Modifications are not allowed, and any slot-car design wheel and 3D print wheel are NOT allowed. | Tire | F1 specific tires only, 11mm front 14mm rear. Refer to General Rules>Tires section for information. | Batteries | Lipo battery maximum 8.4 volts. | ESC | Any ESC sensored or Sensorless. Must be run in blinky mode. | Body | Any F1 Lexan-style body is allowed. Refer to General>Body & Modifications section for additional information. | Option Parts | Open any parts allowed (including homemade parts, 3D-printed, and prototype parts.) |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
LMP
INFO / RULES
All cars must perform 2 pit stops during each main
Chassis | GLF-1 | Wheelbase | 114 mm Wheel Base ONLY | Motor | Open 3500kv, 8,4v Lipo only. No option or aftermarket rotors are allowed. Motors will be teched for Kv using a SkyRC Motor analyzer. Maximum Kv 3700. | Gear Ratio | Open | Wheels | Any brand F1-specific front and rear rims are allowed. The maximum front-wheel width is 11mm. The maximum rear wheel width is 14mm. The maximum wheel diameter is 20mm. All rims must be original designs made for 28th-scale cars. Modifications are not allowed, and any slot-car design wheel and 3D print wheel are NOT allowed. | Tire | Refer to General Rules>Tires section for information. | Batteries | Lipo battery maximum 8.4 volts. | ESC | Any ESC sensored or Sensorless. Must be run in blinky mode. | Body | GL LMP body. Refer to General>Body & Modifications section for additional information. | Option Parts | Open any parts allowed (including homemade parts, 3D-printed, and prototype parts.) |
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|
Future Champions
INFO / RULES
This class is intended for Novice drivers only. Cars should be run in 50% (Training) mode. Kyosho Box Stock is the only other class that a driver will be allowed to compete in if they are registered for this class
|
5 min |
7 min |
5 min |
5 min |
5 min |
5 min |
|
3 qualifiers - 5 minutes each. 8 car mains + 0 Bumps. Triple A-Mains.
|
|