Beginner Class for younger and new drivers.

Chassis:
Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, MRC MR01 and PNR2.5W. 90mm-102mm wheel base only.

Body:
Any

Motor:
Any

ESC:
Kyosho ASF VE VE Pro MR03S RWD and EVO, PN 16A ESC (#500807 and #500807A) Battery: Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used. No other type of battery may be used. For example: Lithium Polymer may not be used.

Additional battery for transponder allowed.

Option Parts:
Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel:
All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims  must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply.

Please address any questions concerning tire cleaners at the drivers meeting. 

Motor:
Kyosho MZ9P and MZ9E Motor from RTR, allow change the motor wire and remove the safety swtich.

Chassis:
Kyohso MR03S, MR03S2 and MR03 RWD.

Wheels:
Kyosho or PN plastic wheels, Front 8.5mm x 20mm, Rear 11mmx20mm, offset must fit inside of the body.

Tire:
Kyosho or PN rubber tire only Traction Compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply.

Please address any questions concerning tire cleaners at the drivers meeting.

Electronic & Transmitter:
Kyohso original from RTR, NO any modification.

Gear Ratio:
Fixed 9T Pinion with Stock Gear Diff. Kyosho or PN 400329 only.

Wheelbase:
90mm to 102mm

Body:
Kyosho original AutoScale body, white body, Jomurema GT01 body and TRP Scale body, all parts must be original form that body, limited wheel clearance modification allowed.

Batteries:
Kyosho Speed House 800HV, Peak Racing 900HV, TRP747, Orion 750SHO, TRP900, PN HP750 and PN HP900 AAA NiMH 4pcs only.  

Option Parts:
Kyosho or PN Ball Bearing, wheel nut and T-Plate only.

Modifications:
It must be run in stock configuration. 

Chassis:
Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, PN Racing PNR2.5W.
90mm-102mm wheelbase only.

Body:
Kyosho Mini-Z autoscale and white bodies, LeMans body TRP Scale and Jomurema GT01 body only. No Lexan Bodies. Full windshield and window must be installed, except for clearance, Lexan window and Lexan Roof allowed. Headlight buckets may be omitted but lens must be in place
(or covered by decal or tape). Small body parts may be omitted. Front splitters and body sides may be trimmed for track clearance. Wing any commercially available.

Motor:
Any branded 3500kv brushless motor or 70T brushed motor 
Option PN Brushless Armature allowed. Change motor connect wire allowed.

Gearing:
Open

ESC:
Kyosho AM AD ASF VE VE Pro MR03S RWD MR03 RWD and EVO, PN DSM2 board (#500803A)
and PN 16A ESC (#500807), all other brand and/or sensored escs must run in "Blinky" mode (no turbo or boost timing).

Battery:
Cars must be powered by four AAA batteries. Alkaline, Ni-MH or Ni-Cd batteries may be used.

Additional battery for transponder allowed.

Chassis:
Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR, GLR-GT, MRC MR01, PNR2.5W, RTRC RTA, Atomic MRZ and NEXX Skyline GT Body 90mm-98mm wheel base only LM Body 102mm wheel base only.

Body:
Kyosho Mini-Z, TRP Scale and Jomurema GT01 body only, full windshield and window must be installed, except for clearance, Lexan window and Lexan Roof allowed.

Motor:
ANY brand 3500kv brushless motor. Fixed Gear ratio 64 Pitch 10 Pinion (#416410WC or #426410WC) / 53T Spur Gear (#MR2953WC Yellow) ONLY

ESC:
OPEN any Sensored or Sensorless ESC on BLINKY MODE only (when applicable), no Bluetooth device attached.

Battery:
2S Li-Po battery maximum 8.4 volt

Option Parts:
Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed. 

Wheel:
All brand Plastic and Aluminum Mini-Z production wheel rims are allowed. Maximum front wheel width is 8.5mm. Maximum rear wheel width is 11mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting.  

Chassis:
Kyosho Mini-Z Racer MR01, MR015, MR02, MR03, Jomurema, GL Racing GLR GLR-GT, MRC
MR01, PNR2.5W, RTRC RTA, Atomic MRZ, Atomic MRT and NEXX Skyline
94mm-98mm Wheel Base ONLY, No weight limit.
 
Approved Lexan Body:
PN - Supra A90, JGT1, JSK, AD4, GT4LB, 992GT3, M4GT3
SBRC - Zenvo ST1, Phenom GT, NSX, 458, SBX, STR, HYR
Marka - RK410, RK408, RK-S, RK-SP6, RK-P-One, RK-W, RK-12, RK-TWR
Atomic - M4Z, DBX, HYP, VST
GL Racing - P1M
Maximum wing size not bigger than original wing cutting line.
#600630 PN Carbon Wing and #600640 Lexan Wing allowed.
(Aftermarket bodies is TBA, contact philip@pnracing.com to submit your bodies sponsor)

Approved Hardshell body:
Kyosho Mini-Z, TRP Scale and Jomurema GT01 body only, full windshield and window must be installed, except for clearance, Lexan window and Lexan Roof allowed.  

Motor:
Open any Mini-Z size motor, sensored or sensorless.

ESC:
Open any ESC sensored or sensorless.

Battery:
Any battery maximum 8.4 volt
Additional battery for transponder allowed. 

Option Parts:
Any aftermarket brand Mini-Z production parts allowed. Any homemade parts, 3D print option parts and prototype parts NOT allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel:
All brand Plastic and Aluminum rims are allowed. Maximum front wheel width is 11mm. Maximum rear wheel width is 14mm. Maximum wheel diameter is 21mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel NOT allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting. 

Chassis:
Open any 2WD chassis ONLY, 98mm-102mm Wheel Base ONLY.

Body:
Any commercially available 98-102mm Pan Body 

#600800 PN Racing Lexan Pan Car Body #600810 PN Racing BMR Lexan Pan Car Body #600810L PN Racing BMR Lexan Light Weight Version Pan Car Body Marka RK-AMR Atomic MP1 #SBRC-B011 SBRC 

Motor:
Open any Mini-Z size motor, sensored or sensorless.

ESC:
Open any ESC sensored or sensorless

Battery:
Any battery maximum 8.4 volt. Additional battery for transponder allowed.

Option Parts:
Open any parts allowed (including homemade parts, 3D print parts and prototype parts)

Wheel:
All brand Plastic and Aluminum rims are allowed. Maximum Front wheel width is 11mm. Maximum Rear wheel width is 14mm. Maximum wheel diameter is 20mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel not allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting.

Chassis:
Any 1/27 1/28th scale chassis
No weight limit.
 
Approved Lexan Body:
Pickup Truck

Motor:
Open any Mini-Z size motor, sensored or sensorless.

ESC:
Open any ESC sensored or sensorless.

Battery:
Any battery maximum 8.4 volt
Additional battery for transponder allowed. 

Option Parts:
Any aftermarket brand Mini-Z production parts allowed. Any homemade parts allowed, 3D print option parts and prototype parts allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed.

Wheel:
All brand Plastic and Aluminum rims are allowed. Maximum front wheel width is 11mm. Maximum rear wheel width is 14mm. Maximum wheel diameter is 21mm. All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any slot-car design wheel and 3D print wheel NOT allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70% alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply. Please address any questions concerning tire cleaners at the drivers meeting. 

Chassis:
GL Racing F1 or kyosho F1

Body:
F1 Body Only

Motor:
ANY brand 3500kv brushless motor. Open Gearing

ESC:
OPEN any Sensored or Sensorless ESC 

Battery:
2S Li-Po battery maximum 8.4 volt

Option Parts: Any aftermarket brand Mini-Z production parts allowed, any homemade parts, 3D print option parts and prototype parts not allowed. Allowed 3D Print Transponder Holder, Body Side Clips, ESC Top Cover allowed. 

Wheel:
F1 specific wheels mounted as stated. F wheels on Front. R wheels on Rear.

Tire:
F1 specific tires by GL Racing or Marka only  

Chassis:
Kyosho Mini-Z Racer AWD MA010, MA015, MA020 and MA030, Atomic BZ and SZ2, GL Racing GLA, Mini-Q Q7.
94mm-98mm Wheel Base ONLY, No weight limit.

Body:
Kyosho, GL Racing or Jomurema hardshell or lexan

Motor:
Open any Mini-Z size motor, sensored or sensorless.

ESC:
Open any ESC sensored or sensorless

Battery:
Any battery maximum 8.4 volt
Additional battery for transponder allowed.

Option Parts:
Open any parts allowed (including homemade parts, 3D print parts and prototype parts)

Wheel:
All brand Plastic and Aluminum rims are allowed. Maximum Front wheel width is 11mm. Maximum Rear wheel width is 14mm. Maximum wheel diameter is 20.5mm.

All wheel rims must be original design made for Mini-Z RACER, any modification is not allowed, any
slot-car design wheel and 3D print wheel not allowed.

Tire:
Any Brand of Rubber Mini-Z production tire ONLY. Homemade tires, Foam tires, Silicon tires, Urethane tires, Ethyl Carbamate tires NOT allowed. No tire insert use. Traction compounds NOT allowed on tire or on race surface. Tire warmers are allowed. Tires may be cleaned with a 70%
alcohol solution. If a driver uses tire cleaner that has been deemed illegal, the driver will be subject to any penalties that apply.

Please address any questions concerning tire cleaners at the drivers
meeting.